home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-20
/
mods_all.zip
/
IC2410.6
< prev
next >
Wrap
Text File
|
1992-09-15
|
2KB
|
38 lines
IC2410.6
This is a document that has been sent to me as a supplement to
the ICOM 2410A/H operator's manual in reference to crossband
repeat functions by ICOM's Technical Support Staff. I've been
using the crossband repeat function for the last several days and
have found no major problems with this function. The only
objectionable side effects of this function are a long squelch
tail and having to wait for a repeater to drop before you can
transmit to the crossband repeater. If anyone has any knowledge
on how to eliminate or lessen these effects, I would appreciate a
reply.
Hope this helps out. And many thanks to Gary (KF7XU) and
LynDel (AA7DG) at ICOM for supplying these documents and their
expertise.
IC-2410A/H SPECIAL FUNCTIONS
MINI REPEATER FUNCTION (SUB BAND REMOTE CONTROL)
OPTIONAL UT-55 NEEDS TO BE INSTALLED
OPERATION:
1. Set frequencies on both UHF and VHF. If necessary set
transmit offset and tone. Then sub band remote control mode
needs to be chosen.
2. Sub band remote control mode will be cancelled by sending D
B * Remote control code and the set will go to mini repeater
mode. The identical function will be obtained which is
described in #3 of "Mini Repeater Function".
3. Mini repeater function will be cancelled by the radio going
to sub band remote control mode. If pass word has been
programmed, it is necessary to send a pass word. Another
way to cancel mini repeater function is to hold "SET" key on
the main radio.
CONTINUED IN IC2410.7